BLOG PAGES

Jan 4, 2014

Homemade Venison Cheddar-Jalapeno Summer Sausage - Allrecipes


Submitted By: Emily Tisdale
Photo By: tamrann

Prep Time: 30 Minutes
Cook Time: 1 Hour 30 Minutes
Ready In: 1 Day 2 Hours
Servings: 40

"This is a nice change from regular summer sausage. The cheddar and jalapenos give it a bit of a spicy kick that is sure to please at gatherings. We serve this at the 'Beast Feasts' we host every year where all the dishes are from wild game. This recipe works well with beef as well."

INGREDIENTS:
1 cup cold water
3 tablespoons sugar-based curing
mixture (such as Morton® Tender Quick
®)
2 teaspoons mustard seed
1 teaspoon garlic powder
1 teaspoon coarse ground black pepper
2 teaspoons liquid smoke flavoring
3 pounds lean ground venison
1 cup shredded Cheddar cheese
2 jalapeno peppers, seeded and minced

DIRECTIONS:
1. Stir the water, curing mixture, mustard seed, garlic powder, black pepper, and liquid smoke in a large bowl until the curing mixture has dissolved. Mix in the ground venison, Cheddar cheese, and jalapeno peppers; mix until evenly blended and somewhat sticky, about 3 minutes. Divide the mixture in half, and roll each half into 2 inch thick logs. Wrap each log tightly with aluminum foil, and refrigerate for 24 hours.
2. Preheat an oven to 300 degrees F (150 degrees C). Line a baking sheet with aluminum foil, then remove the foil from the sausage logs, and place them onto the baking sheet.
3. Bake in the preheated oven until the internal temperature reaches 170 degrees F (75 degrees C), 1 1/2 to 2 hours. Cool the sausages on a rack until they have cooled to room temperature. Dab occasionally with a paper towel to absorb excess grease. Slice thinly to serve.

Full Article:
http://allrecipes.com/recipe/venison-cheddar-jalapeno-summer-sausage/

Dec 31, 2013

21 Uses for Epsom Salt



We use epsom salt (affiliate) a lot at our house. It is a good source of magnesium (here’s why we love magnesium) and has dozens of household uses. 

Here are our favorites:
As a relaxing Magnesium Bath Soak – Add at least 1 cup of epsom salt to a warm bath and soak for 20 minutes.
Splinter Removal- Soak in concentrated epsom salt water to pull out a splinter.
Magnesium Foot Scrub- Make a homemade magnesium scrub (recipe here) for a boost of magnesium and super soft skin.
Better Vegetables- Add a tablespoon of epsom salt to the soil below a tomato plant to boost growth.
Facial Wash- Add a pinch of epsom salt to your usual face cleaner (or to your oil cleansing routine) for a skin exfoliating magnesium boost.
Tile/Grout Cleaner- Mix equal parts of liquid dish soap and epsom salts and use to scrub tile and grout. Rinse well for a streak free shine.
Body Aches- Add 2 cups of epsom salt to a warm bath and soak for at least 20 minutes to help relieve muscle sprains and for a transdermal magnesium boost.
Homemade Sea Salt Spray- Make your own sea salt spray to add texture and volume to hair- recipe here.
Water House Plants- Help house plants grow by adding a couple tablespoons of epsom salt to the water when you water them.
Volumizing Hair Mask- Combine equal parts of conditioner and epsom salt and leave on hair for 20 minutes. Rinse well and let air dry for thicker hair.
Foot Soak- For a concentrated magnesium boost, add 1 cup of epsom salt to a hot foot soak and soak for 20 minutes.
Get rid of slugs- Have slugs in your garden or on your patio? Sprinkle epsom salt to deter them.
Making Magnesium Lotion- Using magnesium flakes is a better option, but in a pinch, you can use epsom salt to make homemade magnesium oil (recipe here).
Laxative- For occasional constipation, a teaspoon of epsom salt dissolved in water can help. Check with a doctor first.
Beautiful Roses- Add a tablespoon a week to the soil around rose bushes before watering for faster growth.
Soil Prep- Before planting, we add a few bags of epsom salt to the soil in the garden and water in to help replenish soil magnesium levels.
Headache relief- There is evidence that soaking in a soothing epsom salt bath may help relieve headache.
Smooth skin- Mix 1/2 cup epsom salt with 1/4 cup olive oil and scrub skin in the shower for healthy and smooth skin.
Itchy Skin or Bug Bites- Dissolve a tablespoon of epsom salt in to 1/2 cup of water and cool. Spritz on itchy skin or apply a wet compress to help relieve itching.
Minor Sunburn Relief- Use the same ratio in the itchy skin relief above and spritz on to minor sunburns to help soothe them.
Help Kids Sleep Better- Add a cup to kids’ bath water before bed to help them sleep peacefully..

Full Article: 21 Uses for Epsom Salt

16 Foods That’ll Re-Grow from Kitchen Scraps | Wake Up World


By Andy Whiteley
Co- Founder of Wake Up World

Looking for a healthy way to get more from your garden? Like to know your food is free of the pesticides and other nasties that are often sprayed on commercial crops? Re-growing food from your kitchen scraps is a good way to do it!

There’s nothing like eating your own home- grown vegies, and there are heaps of different foods that will re- grow from the scrap pieces that you’d normally throw out or put into your compost bin.

It’s fun. And very simple … if you know how to do it.

Just remember … the quality of the “parent” vegetable scrap will help to determine the quality of the re-growth. So, wherever possible, I recommend buying local organic produce, so you know your re-grown plants are fresh, healthy and free of chemical and genetic meddling.

Leeks, Scallions, Spring Onions and Fennel

You can either use the white root end of a vegetable that you have already cut, or buy a handful of new vegetables to use specifically for growing.

Simply place the white root end in a glass jar with a little water, and leave it in a sunny position. I keep mine in the kitchen window. The green leafy part of the plant will continue to shoot. When it’s time to cook, just snip off what you need from the green growth and leave the white root end in water to keep growing. Freshen up the water each week or so, and you’ll never have to buy them again.
Lemongrass

Lemongrass grows just like any other grass. To propagate it, place the root end (after you’ve cut the rest off) in a glass jar with a little water, and leave it in a sunny position.

Within a week or so, new growth will start to appear. Transplant your lemongrass into a pot and leave it in a sunny outdoor position. You can harvest your lemongrass when the stalks reach around a foot tall – just cut off what you need and leave the plant to keep growing.
Celery, Bok Choi, Romaine Lettuce & Cabbage

Similar to leeks, these vegetables will re-grow from the white root end. Cut the stalks off as you normally would, and place the root end in a shallow bowl of water – enough to cover the roots but not the top of your cutting. Place it in a sunny window position, occasionally spraying your cutting with water to keep the top moist.

After a few days, you should start to see roots and new leaves appear. After a week or so, transplant it into soil with just the leaves showing above the level of the soil. The plant will continue to grow, and within a few weeks it will sprout a whole new head.

Alternatively you can plant your cutting directly into soil (without starting the process in water) but you will need to keep the soil very moist for the first week until the new shoots start to appear.
Ginger

Ginger is very easy to re-grow. Simply plant a spare piece of ginger rhizome (the thick knobbly bit you cook with) in potting soil with the newest (ie. smallest) buds facing upward. Ginger enjoys filtered, not direct, sunlight in a warm moist environment.

Before long it will start to grow new shoots and roots. Once the plant is established and you’re ready to harvest, pull up the whole plant, roots and all. Remove a piece of the rhizome, and re-plant it to repeat the process.

Ginger also makes a very attractive house-plant, so if you don’t use a lot of ginger in your cooking you can still enjoy the lovely plant between harvests.
Potatoes

Re-growing potatoes is a great way to avoid waste, as you can re-grow potatoes from any old potato that has ‘eyes’ growing on it. Pick a potato that has robust eyes, and cut it into pieces around 2 inches square, ensuring each piece has at least one or two eyes. Leave the cut pieces to sit at room temperature for a day or two, which allows the cut areas to dry and callous over. This prevents the potato piece from rotting after you plant it, ensuring that the new shoots get the maximum nutrition from each potato piece.

Potato plants enjoy a high-nutrient environment, so it is best to turn compost through your soil before you plant them. Plant your potato pieces around 8 inches deep with the eye facing upward, and cover it with around 4 inches of soil, leaving the other 4 inches empty. As your plant begins to grow and more roots appear, add more soil. If your plant really takes off, mound more soil around the base of the plant to help support its growth.
Garlic

You can re-grow a plant from just a single clove – just plant it, root-end down, in a warm position with plenty of direct sunlight. The garlic will root itself and produce new shoots. Once established, cut back the shoots and the plant will put all its energy into producing a tasty big garlic bulb. And like ginger, you can repeat the process with your new bulb.
Onions

Onions are one of the easiest vegetables to propagate. Just cut off the root end of your onion, leaving a ½ inch of onion on the roots. Place it in a sunny position in your garden and cover the top with soil. Ensure the soil is kept moist. Onions prefer a warm sunny environment, so if you live in a colder climate, keep them in pots and move them indoors during frostier months.

As you use your home-grown onions, keep re-planting the root ends you cut off, and you’ll never need to buy onions again.

Sweet Potatoes

When planted, sweet potato will produce eye-shoots much like a potato. Bury all or part of a sweet potato under a thin layer of soil in a moist sunny location. New shoots will start to appear through the soil in a week or so. Once the shoots reach around four inches in height, remove them and re-plant them, allowing about 12 inches space between each plant. It will take around 4 months for your sweet potatoes to be ready. In the meantime, keep an eye out for slugs… they love sweet potatoes.

To propagate sweet potatoes, it is essential to use an organic source since most commercial growers spray their sweet potatoes to prevent them from shooting.
Mushroom

Mushrooms can be propagated from cuttings, but they’re one of the more difficult vegies to re-grow. They enjoy warm humidity and nutrient-rich soil, but have to compete with other fungus for survival in that environment. Although it is not their preferred climate, cooler environments give mushrooms a better chance of winning the race against other fungi.

Prepare a mix of soil and compost in a pot (not in the ground) so your re-growth is portable and you can control the temperature of your mushroom. I have found most success with a warm filtered light during the day and a cool temperature at night. Just remove the head of the mushroom and plant the stalk in the soil, leaving just the top exposed. In the right conditions, the base will grow a whole new head. (In my experience, you’ll know fairly quickly if your mushroom has taken to the soil as it will either start to grow or start to rot in the first few days).
Pineapple

To re-grow pineapples, you need to remove the green leafy piece at the top and ensure that no fruit remains attached. Either hold the crown firmly by the leaves and twist the stalk out, or you can cut the top off the pineapple and remove the remaining fruit flesh with a knife (otherwise it will rot after planting and may kill your plant). Carefully slice small, horizontal sections from the bottom of the crown until you see root buds (the small circles on the flat base of the stalk). Remove the bottom few layers of leaves leaving about an inch base at the bottom of the stalk.

Plant your pineapple crown in a warm and well drained environment. Water your plant regularly at first, reducing to weekly watering once the plant is established. You will see growth in the first few months but it will take around 2-3 years before you are eating your own home-grown pineapples.
And one for the kids….. ‘Pet’ Carrot Tops!!

I call this a ‘pet’ because the plant that re-grows from planting a carrot top will NOT produce edible carrots, only a new carrot plant. The vegetable itself is a taproot which can’t re-grow once it has been removed from the plant. But it makes an attractive flowering plant for the kitchen, and they’re easy and lots of fun to grow…. for kids of all ages!

Cut the top off your carrot, leaving about an inch of vegetable at the root. Stick toothpicks into the sides of the carrot stump and balance it in a glass or jar. Fill the glass with water so that the level reaches the bottom of the cutting. Leave the glass in filtered, not direct, sunlight and ensure water is topped up to keep the bottom of your cutting wet. You’ll see roots sprout in a few days, and you can transplant your ‘pet’ carrot into soil after a week or so.

Your success re-growing lovely fresh vegies from scrap may vary, depending on your climate, the season, soil quality and sunlight available in your home or garden. And some vegies just propagate easier than others do. In my experience, a bit of trial and error is required, so don’t be afraid to do some experimenting. Get your hands dirty. It’s lots of fun! And there’s nothing like eating your own home-grown vegies.

Article Sources:

wakeup-world.com/2012/06/21/four-foods-thatll-re-grow-from-kitchen-scraps

gardeningknowhow.com/children-in-the-garden/grow-carrot-tops

frugalliving.about.com/od/growyourownfoods/tp/How-To-Regrow-Foods

gardenofeaden.blogspot.com.au/2010/01/how-to-grow-sweet-potatoes-in-pots

gardenguides.com/88669-can-grow-mushrooms-store-bought-mushrooms

youtube.com/watch?v=2YIO3Zw5H6E

permies.com/t/2997/plants/Vegetables-You-Eat-Replant

tipnut.com/nifty-food-plants

gardenswag.com/2011/12/5-foods-you-can-grow-from-kitchen-scraps

gardenguides.com/117543-plant-cuttings-potatoes

organicauthority.com

tropicalpermaculture.com/growing-ginger

gardenswag.com/2011/12/5-foods-you-can-grow-from-kitchen-scraps

instructables.com/id/Grow-Onions-from-Discarded-Onion-Bottoms

17apart.com/2012/02/how-to-regrowing-bok-choy

rickswoodshopcreations.com/Pineapple/pineapple

About the Author

Andy is co-founder of Wake Up World and an avid amateur gardener.

Full Article: 16 Foods That’ll Re-Grow from Kitchen Scraps | Wake Up World

The Hydraulic Ram: Pumping Water Uphill

The hydraulic ram made pumping water easy and inexpensive.
By Sam Moore


Cattle drinking from a watering trough. Before stationary gas engines became widely available, the hydraulic ram pump offered an inexpensive, reliable source of water for livestock and irrigation.
Photo By Sam Moore

1. Water flows down the drive pipe (A) and escapes through the impulse valve (B). (This valve is variously called a waste valve, clack valve, escape valve, overflow valve or impulse valve.) As the water flows through the impulse valve, it builds enough pressure to suddenly close the valve.
Illustration By Sam Moore



2. The water that has been flowing through the impulse valve has built up a large amount of momentum that must be dissipated. This so-called “water hammer” effect causes a sudden surge in pressure inside the pump body, forcing open the one-way delivery valve (also called the discharge valve) at (C).
Illustration By Sam Moore

3. Moving water rushes through the delivery valve into the air chamber (D) and compresses the air that is trapped inside. When the water pressure in the pump body drops below that of the air chamber, the delivery valve (C) closes, trapping the water and compressed air inside the air chamber.
Illustration By Sam Moore

First, a riddle. What do a hydraulic ram and a hot air balloon have in common?

It all started in England in about 1772. In a 1775 letter to a Dr. Franklin (Ben?), a man named John Whitehurst wrote: “Dear Sir, Presuming the mode of raising water by its momentum may be new and useful to many individuals, induces me to send you the enclosed plan and description of a work, executed in the year 1772, in Oulton, in Cheshire, the feat of Philip Egerton, Esq., for the service of a brew house and other offices, and is found to answer effectually.”

The system wasn’t automatic, in that it required the opening of a tap to start the water flowing. However, the tap was located in a kitchen where “the consumption of water is very considerable (and) that water is frequently drawing from morning until night all the days of the year.”

On June 4, 1783, in an unrelated event in Paris, the Montgolfier brothers, Joseph and Jacques, sent up the world’s first hot air balloon. A few months later, the brothers demonstrated their balloon at a command performance for Louis XVI and Marie Antoinette at the Palace of Versailles. On that trip, the balloon carried a sheep, a rooster and a duck. Shortly thereafter, a science teacher and an army officer became the first human balloonists when they flew a distance of 5.5 miles over Paris.
Pumping water uphill

In about 1796, Joseph Montgolfier applied his inventive talents to the problem of pumping water. The Frenchman added a water-operated valve in place of Whitehurst’s manual tap. That made the device self-acting, and, as long as the water supply remained steady, the hydraulic ram was virtually a perpetual motion machine. Today, Montgolfier is credited with being the father of both manned flight and the hydraulic ram.

The fame of the simple pump that could push water uphill using only the energy of falling water spread, and several were imported into the U.S. In 1809, New Yorkers Joseph Cerneau and Stephen Hallett patented the first American water ram, but it wasn’t until the 1840s that use of the device began to spread. Hydraulic rams were mostly used to supply water to individual farms and homes, but there were larger installations. One firm claimed, in an 1852 ad, that the “Birkinbine Patent Improved Hydraulic Ram” had pumped 20,000 gallons of water a day to the town of Naples, N.Y. The Rife hydraulic engine was said to be capable of pumping water as much as 200 feet vertically in quantities as high as 50,000 gallons per day. Rife Hydraulic Engine Mfg. Co. remains in business today, making hydraulic ram pumps in Nanticoke, Pa.

Even though water ram pumps are easy and inexpensive to install and require little maintenance, they’re inefficient. In an 1866 experiment, where the head (or height of fall) of the input water was 8.8 feet, a ram was able to lift water 63.4 feet. However, 27.7 pounds of water were used per minute, with only 1.7 pounds raised to the reservoir. With so much water wasted in the ram, the devices fell out of favor when engine-powered and, later, electric pumps became popular. Today, however, with the growing interest in environmental concerns and the rising cost of energy, the ability to pump water uphill using only the energy of that water is again generating interest.

While chances of finding a good drinking water supply today are somewhat unlikely, the hydraulic ram pump can be used to pump potable water from a good flowing spring that has been tested for purity. There are, however, many uses for water from rivers, streams and ponds, such as watering gardens and lawns, filling a swimming pool or supplying cooling water to a heat pump. Even a small flow of 1 or 2 gallons per minute adds up to a lot of water in 24 hours. If the flow is sufficient, water for irrigation and livestock can be provided inexpensively and reliably. The unpressurized output of a water ram’s delivery pipe is especially useful in the drip irrigation systems so popular today.
How the hydraulic ram works

OK, so how the heck does a hydraulic ram work?

A hydraulic ram uses the energy of a large amount of water flowing a short distance downhill to force a small amount of that water to a much greater height. This phenomenon is possible because of a few basic laws of physics. First, a moving object resists being stopped. Second, water cannot be compressed. Third, air can be compressed. And fourth, gravity forces water to run downhill. Therefore, water moving downhill under the force of gravity, and contained within a pipe, will try to keep moving if the flow is suddenly stopped. This force is much greater than the actual weight of the water, and creates a “water hammer” effect at the ram, which is sufficient to force some of that water up a smaller pipe.

Because some of the air inside the chamber is mixed with the water being pushed out the delivery pipe, it needs to be replenished. (See diagrams in the Image Gallery for more details.) Many rams used a small sniff (or snifter valve) in the pump body that opened on the vacuum of the water recoil and drew in a little air. That air then entered the chamber the next time the delivery valve opened. Modern rams use a captive air supply (such as that provided by a diaphragm, a basketball bladder or an inner tube from a small tire) inside the chamber, thus eliminating the need for a sniff valve.

So, now that you know how to pump water without a power source, go ahead, turn on the tap and get yourself a glass of water. FC

Sam Moore grew up on a farm in western Pennsylvania. He now lives in Salem, Ohio, and collects antique tractors, implements and related items. Contact Sam by email at letstalkrustyiron@att.net.

Read full article at Farm Collector : http://www.farmcollector.com/equipment/hydraulic-ram-zmlz12octzbea.aspx

Related Links:

RIFE'S NEW MODEL HYDRAULIC RAM E-BOOK - Farm Collector
www.farmcollector.com/shopping/detail.aspx?itemnumber=3939



Format: Downloadable PDF. ISBN: Pages: 12. This e-book details all of the hydraulic pump models produced by Rife Ram and Pump Works. Inside is a list of ...

COLLECTING RAMS ARE MY HOBBY
www.farmcollector.com/steam.../collecting-rams-are-my-hobby.aspx

Dec 30, 2013

Constructing A Planting Jig - The Modern Victory Garden

It’s a cool and wet weekend so the outside options are pretty limited, however it is a great time to do some shop projects. One of the tasks I had on my list for this weekend was to repot the Chinese cabbage and kale starts. They are a month old now and have totally outgrown their starter cell packs. I want to keep them under lights for another month before permanently planting them up in containers in the greenhouse. Saturday morning I popped them into sturdy 4 inch pots using organic potting soil I have on hand in the shop.




This morning (Sunday), I also planted up 2 six packs of Super Gourmet Salad Blend lettuce, 2 six packs of Ching-Chiang pac choi, 2 large flat packs of Walla Walla onions, and 2 large flat packs of Candy onions. These were then covered with a plastic dome and placed on the heat mat under the grow lights. As soon as the seedlings emerge, I will remove the plastic dome and lower the lights down to just a few inches above the plants.

The bigger project I had on my list for this weekend was to construct the first prototype of an idea I have had for a planting jig. As of this morning, I have completed the first one, which is a 2-inch spaced planting jig. I intend to make 3 more of these – one with 3-inch spacing, one with 4-inch spacing, and one with 6-inch spacing. These are the most common within row (in all directions) spacing needed to intensively plant garden beds. I made the jig a 2 foot by 2 foot size because I rarely plant single squares of any one item, but rather do multiple blocks of a crop and often work my way down a large section of bed. 

This is the list of materials that I used for this project:
One sheet of pegboard - 2-foot by 4-foot dimension (you will use half of this for one jig)
One sheet of good quality plywood – 2-foot by 2-foot dimension
Two packages of Fluted Dowel Pins – ¼ inch diameter, 1 ¼ inch length – 72 count per package (need 144 for a 2'x2' board with 2 inch spacing)
Package of #8 X ¾ inch wood screws – (get self tapping, I did not and regretted it)
Carpenters wood glue
Two 5 ¾ inch door pulls (comes with short screws)

Here is the list of tools I used for this project:
A power jigsaw (you could use a table saw as well) to rip the 2’X4’ sheet of pegboard in half to make two 2’X2’ pegboard sections
A power drill with a screwdriver bit attachment
A rubber headed or plastic headed hammer (you could gently use a regular hammer instead)
Measuring tape
Straight edge Carpenters Square
Pencil
2 pieces of scrap wood to use as blocking

Here’s a picture of the plywood and several of the materials and tools used (not all). You can purchase 2-foot by 2-foot squares of plywood (and 2-foot by 4-foot panels of pegboard) at places like Home Depot or Lowes.


Step One - cut the sheet of 2’X4’ pegboard in half to make two sheets of 2’X2’ pegboard. I held the wood while my husband cut this using a jigsaw.


Step Two – place some carpenters wood glue over the surface of the 2’X2’ section of plywood. 


Step Three – place the 2’X2’ section of pegboard on to the glued surface of the 2’X2’ section of plywood. The idea is to provide a backing to the pegboard to make it stronger and to put a floor at the base of each pegboard hole opening. 


Step Four – turn the pegboard and plywood panel over and screw together at each corner using the #8-3/4 inch screws. This is not the best picture, but it is a close up of one of the screws. Once completed turn the panel back over so that the pegboard is facing up.


Step Five – using the spacing you desire for the planting jig, place a big dollop of carpenters wood glue in each pegboard hole and place a ¼ inch fluted dowel pegs, tapping it firmly in using a plastic headed hammer. I am making a 2-inch spacing planting jig so the pegs are spaced every other hole from one another. The pegboard holes are spaced 1 inch apart which makes setting up the grid very easy to do. Once they are all in place, let this sit over night to let the glue set up and dry completely.




Step Six – the next day, carefully turn the peg board section over and place it on some lengths of scrap lumber (thin enough to fit between the rows of protruding pegs) such that the board is supported without putting pressure directly on the glued in pegs. The next two pictures show this – including the last picture which shows the clearance maintained between the pegs and the surface of the work table.



Step Seven – measure five inches in from each side and make a mark with a pencil. Do this twice on each side to establish two points from which a straight line can then be drawn. Similarly, measure nine inches from the top of the panel and make a mark with a pencil – doing it twice to facilitate drawing a straight line from point to point.


Step Eight – use a carpenter’s straight edge square and line it up with the pencil marks and then draw a straight line using your pencil. Do this for a vertical line on each side (spaced 5 inches in from the edges), and one horizontal line spaced 9 inches from the top.


Step Nine (last one!) – center the door pulls over the vertical lines and abutting the top edge against the horizontal lines and screw them into place. 


That’s all there is to it for the construction. Here’s how it works. Holding it using the door handles, lower it over a section of prepared garden bed soil and lay it flat on the surface of the soil so that the pegs are facing the soil. For shallow holes, just set it in place and do not press down – the weight of the board is sufficient for a shallow hole. For a deeper hole, press down on the board with your hands.










Works nicely! Too early to actually plant anything to really try it out, but I think this will make closely spaced planting much quicker and easier to do. Having a 3 inch, 4 inch, and 6 inch jig as well will give me good options for the coming planting season. I have all the materials I need to complete the remaining three jigs with the exception that I need to purchase more dowels. This is a really fast little project to put together so I should be able to finish them all up very quickly - once I purchase the rest of the dowels that I need.
Constructing A Planting Jig - The Modern Victory Garden

Dec 29, 2013

INEXPENSIVELY Brand Your Woodworking - 123 - YouTube


Published on Dec 23, 2013

http://jayscustomcreations.com/2013/1...
Cheap and easy way to brand your work.

----------------------------------------­-----------------

Free SketchUp video tutorials:
http://www.woodworkingwithsketchup.com

----------------------------------------­-----------------

Second Channel:
http://www.youtube.com/jccshorts

----------------------------------------­-----------------

Social links:
Twitter = https://twitter.com/JayBates86
Facebook = http://www.facebook.com/jayscustomcre...
SUBSCRIBE = http://www.youtube.com/jayscustomcrea...

INEXPENSIVELY Brand Your Woodworking - 123 - YouTube

DIY Bar Clamps - YouTube


Published on Oct 4, 2013

Who couldn't use more bar clamps? Make your own and save money. Get the plans here:
http://www.garagewoodworks.com/GW_Sto...

Plans for sale:
http://www.garagewoodworks.com/GW_Sto...

Buy GarageWoodworks Stuff:
http://www.cafepress.com/garagewoodworks

Newsletter
http://www.garagewoodworks.com/regist...

On Twitter:
https://twitter.com/GarageWoodworks

On Facebook:
https://www.facebook.com/GarageWoodworks

Music
Kevin MacLeod (incompetech.com):
'Pilot Error'
'Big Rock'


DIY Bar Clamps - YouTube

Woodworking 101 - Common Woodworking Joinery - YouTube


Published on May 19, 2013

I ask a couple of my woodworking friends to help me talk to you about some common woodworking joinery. Woodworking joinery is the method of joining two pieces of wood together to create a more complex item. Woodworking Joinery is the one thing we as woodworkers need to know and this video talks about 4 common woodworking joints that you are most likely to use in your projects.

In this video you will learn about the following joints

Half Lap Joints - Presented by Jay Bates JaysCustomCreations.com
Jay's YouTube Channel -http://www.youtube.com/user/Jayscusto...
Making a Kerf Maker Jig - http://www.youtube.com/watch?v=iL5lrm...

Mortis and Tenon Joints - Presented by Brian Grella GarageWoodworks.com
Brians YouTube Channel -http://www.youtube.com/user/GarageWoo...
Tenon Jig for the Table Saw -http://www.garagewoodworks.com/jigsfi...

Miter Joints - Presented by Steve Ramsey Woodworking For Mere Mortals
Steve's YouTube Channel -http://www.youtube.com/user/stevinmarin
Build a Miter Jig - http://www.youtube.com/watch?v=H00prA...

Box Joints - Presented by Laney Shaughnessy
Making the Box Joint Jig -
http://www.youtube.com/watch?v=3xDXeP... Part 1
http://www.youtube.com/watch?v=RJeYeQ... Part 2

Check out the links below to my social networks

Music Provided by
Julie Neumark
http://www.julieneumark.com

http://www.asimpledesignofocala.com - Website
http://www.ufoww.com - The United Federation of Woodworkers Member Site
http://www.keek.com/laneyshaughnessy - follow me on Keek (video blog)
http://www.twitter.com/Wood_Jedi - Follow me on Twitter
http://www.facebook.com/asimpledesign... - Like Me on Facebook
http://www.cafepress.com/ASDOO_Gear - A Simple Design of Ocala "Gear" Store


Woodworking 101 - Common Woodworking Joinery - YouTube